NG6 Core Type: The Heart of Hydraulic Systems
NG6 (4WEH6) and NG16(4WEH16) Core Type: The Heart of Hydraulic Systems
- +86 13962947398
- sales@yutungindustrial.com
NG6 (4WEH6) and NG16(4WEH16) Core Type: The Heart of Hydraulic Systems
Yuken Yuken DSG-02 is a type of hydraulic directional control valve manufactured by the company Yuken Kogyo Co., Ltd. Yuken is a well-known manufacturer of
Factory Overview Yutung Factory of the auto steel wheel covers an area of 21,000 square meters. Have full-time workers of more than 200persons. Including 20
Metal Vacuum Casting We have six vacuum casting process lines. This is the product for auto taken from our factory.
Plastic Injection Mold Making for our Houston Client It is rigid PVC, the soft one is just a simple sample to match the rigid PVC
Valve casting pump body casting manufacturer We made this valve casting part for Czech Republic client, they buy from us about 5000pcs annual. The
UPVC window extrusions We worked with our New Zeland client to make the new mold for this upvc window extrusions, and we are upvc extrusions
We manufacture rear axle housing for our Oceanian client for the auto revision after-sale market. We have a series of it, like rear axle housing, rear
Teeth bar stainless steel casting This is the third batch of our teeth investment bar stainless steel casting, it has two diameter 12mm and 14mm.I
PVC extruding tube used for building electric wires passed. The outer diameter is 20mm, and the thickness is 1.3mm or 1.4mm, the length is fine.
Today we made the container loading for mooring chain, accessories and swivel team etc, this 20′ container is shipped to Buenos Aires, Argentina.This container also
It is shining for alu. anodizing tube, check the pictures. We can use the rolling process for the Texture surface.
We made the alu. casting and copper casting of Stuffing box, and tiller arm and the alu. holder used in boat for our USA client,
We made the Rigid pvc (RPBC) extruding for our USA clients, the surface is semi-glossy for inner tube and glossy for outer tube, this tube
We have the full range of hydraulic pressure valve casting, you do not need to pay the mould cost. We have the series of rexroth
We make the PVC extruding parts for our clients by the sample and the tube size. Please check the following picture.
We made the marine boat part-valve bronze casting for our USA clients.The material is C60800. It is also made by casting, bronze casting. Our client is
We made this Needle bearing, thrust bearing, washer and bearing shaft assembly for our hinges, the hinges are also made by us by the process
We made more than ten thousand hinges for our USA ABH clients in Chicago, the hinge is used in the door handle, it is made
Commonly the material is LLDPE, if it is close to the engine, we could choose Cross-linked polyethylene(XLPE), which can resist the temperature more than 100centi
Some Foundry parts made in recent time, check the pictures
This is teeth products made by the foundry, we manufactured it for our Thailand clients. It is said for hanging the heat treatment item.
This bent load washer is made by stamping and cutting, one continuous mould, high efficiency, good price.
This is the new products for precision investment casting
We will contact you within 1 working day, please pay attention to the email with the suffix “@yutungindustrial.com”
You can upload your drawings here for our engineering review.